MAX8903NETI
AI

### Overview of the MAX8903NETI
The **MAX8903NETI** is an integrated 1-cell Li+ (Lithium-ion) battery charger and Smart Power Selector™. It is designed for portable devices that can be powered by either an AC adapter or a USB port. It intelligently manages the power flow between the input source, the battery, and the system load.
---
### Key Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Input Voltage Range** | 4.15V to 16V (Adapter), up to 20V protection |
| **Battery Chemistry** | 1-Cell Lithium-Ion / Lithium-Polymer |
| **Max Charge Current** | Up to 2.0A (Programmable) |
| **USB Input Limits** | 100mA, 500mA, or up to 2.0A |
| **Package Type** | 28-pin TQFN (4mm x 4mm) |
| **Operating Temp** | -40°C to +85°C |
---
### Internal Electronic Components & Subsystems
The MAX8903NETI integrates several critical electronic functions into a single chip to save PCB space:
#### 1. Smart Power Selector™
This is the core logic of the chip. It allows the system to operate even with a dead or missing battery.
* **Priority Management:** It powers the system first and uses any remaining current to charge the battery.
* **Direct Path:** If the input power is insufficient for the system load, the battery can supplement the current.
#### 2. Charger Control Circuitry
The chip implements a standard **CCCV (Constant-Current, Constant-Voltage)** charging profile:
* **Preconditioning:** Safely charges deeply discharged cells at a reduced rate.
* **Fast Charge:** Ramps up to the programmed current (set via external resistors).
* **Top-off:** Transitions to constant voltage as the battery reaches full capacity.
#### 3. Switch-Mode vs. Linear Components
Unlike simple linear chargers, the MAX8903 provides high-efficiency charging. It includes integrated low-resistance MOSFETs to minimize heat dissipation and power loss during the conversion process.
#### 4. Protection and Monitoring Features
* **Thermal Regulation:** Reduces charge current if the die temperature exceeds a specific threshold.
* **NTC Thermistor Input:** Monitors battery temperature to prevent charging in unsafe conditions (too hot or too cold).
* **Overvoltage Protection (OVP):** Protects the system from surges up to 20V on the adapter input.
---
### Typical Pin Functions
| Pin Category | Description |
| :--- | :--- |
| **DC / USB** | Separate inputs for the AC adapter and USB power sources. |
| **SYS** | System output connection to power the device electronics. |
| **BATT** | Connection point for the positive terminal of the Li-ion battery. |
| **ISET / USUS** | Programming pins using resistors to set the charge current and USB limits. |
| **CHG / POK** | Open-drain status outputs to drive LEDs or alert a microcontroller. |
---
### Application Diagram (Simplified)
```text
[ Adapter ] ----> [ DC Pin ]
|
[ MAX8903NETI ] <----> [ Battery ]
|
[ SYS Output ] ------> [ System Load ]
```
---
- ⤷
How do you calculate the resistor values for the ISET pin to set a specific charge current?
- ⤷ What are the main differences between the MAX8903A
- ⤷ B
- ⤷ and N versions?
- ⤷ How does the Smart Power Selector handle a scenario where the system load exceeds the adapter's current limit?