MAH22FAX-R
AI

The **MAH22FAX-R** is a specific part number typically associated with **Mabuchi Motor** (a leading global manufacturer of small electric motors). This specific model belongs to their line of permanent magnet DC motors, often used in automotive components and precision electronic equipment.
---
## 1. Technical Specifications
Below are the general technical parameters for the MAH-22 series motors. *Note: Specific performance curves may vary slightly depending on the "FAX-R" winding configuration.*
| Feature | Description |
| :--- | :--- |
| **Motor Type** | Carbon-brush DC Motor |
| **Operating Voltage** | Typically 8V – 16V (Nominal 12V DC) |
| **Body Shape** | Flat/Oval (Designed for space-saving) |
| **Rotation** | Reversible (Depending on polarity) |
| **Brush Material** | Carbon Brushes (High durability) |
| **Typical Applications** | Automotive door locks, mirrors, and actuators |
---
## 2. Key Electronic & Mechanical Components
The "FAX-R" designation refers to the internal architecture and suppression features of the motor:
### A. The Commutator and Carbon Brushes
* **Carbon Brushes:** Unlike cheap copper-leaf brushes, carbon brushes handle higher currents and provide a much longer operational lifespan.
* **Commutator:** A segmented copper piece that reverses the current direction in the coils as the motor spins.
### B. The Internal Winding (FAX)
* The **FAX** suffix usually indicates a specific wire gauge and number of turns on the armature. This determines the Torque-to-Speed ratio (RPM vs. mA).
* The **-R** suffix often indicates **Internal Varistors or Capacitors** for Electrical Noise (EMI) suppression. This prevents the motor from interfering with the vehicle's radio or ECU.
### C. Magnetic Circuit
* It utilizes high-energy permanent magnets (Anisotropic or Neodymium depending on the specific sub-batch) to maintain high torque in a small form factor.
---
## 3. Common Failure Points
If you are troubleshooting this part in an electronic system, check the following:
1. **Brush Wear:** Over time, the carbon brushes wear down, leading to intermittent operation.
2. **Internal Short:** Overheating can melt the insulation on the armature windings.
3. **Contamination:** Dust or oil getting inside the housing can increase resistance at the commutator.
---
## 4. Typical Integration (Pinout)
The motor usually features two male spade terminals or a proprietary plug connector:
```text
Terminal A (+) ----> Clockwise Rotation
Terminal B (-)
Terminal A (-) ----> Counter-Clockwise Rotation
Terminal B (+)
```
---
- ⤷
What is the exact RPM and torque rating for the MAH22FAX-R at 12V?
- ⤷ Are there specific cross-reference parts for this motor in automotive door lock actuators?
- ⤷ How do I test the internal resistance of this motor to check if it's faulty?