M93C74-RBN7
AI

The **M93C74-RBN7** is a specific type of non-volatile memory integrated circuit. It belongs to the STMicroelectronics family of Serial EEPROMs (Electrically Erasable Programmable Read-Only Memory).
Below is a detailed breakdown of its electronic specifications and features.
---
### 1. General Specifications
The device is organized internally as 512 words of 16 bits each or 1024 words of 8 bits each, depending on the wiring of the "ORG" pin.
| Feature | Specification |
| :--- | :--- |
| **Memory Size** | 8 Kbit (8192 bits) |
| **Interface** | Microwire (3-wire serial) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz (at 5V), 1 MHz (at 1.8V) |
| **Package Type** | PDIP8 (Plastic Dual In-line Package, 8 pins) |
| **Temperature Range** | -40°C to +85°C (Industrial Grade) |
---
### 2. Pin Configuration (PDIP8)
Understanding the pinout is essential for integrating the chip into a circuit.
| Pin Number | Name | Description |
| :--- | :--- | :--- |
| 1 | **S** | Chip Select (Active High) |
| 2 | **D** | Serial Data Input |
| 3 | **C** | Serial Clock |
| 4 | **Q** | Serial Data Output |
| 5 | **Vss** | Ground |
| 6 | **ORG** | Organization Select (x8 or x16) |
| 7 | **DU** | Don't Use / No Connect |
| 8 | **Vcc** | Supply Voltage |
---
### 3. Key Operational Features
* **Self-Timed Write Cycle:** The device includes an internal timer that controls the write cycle, meaning the host microcontroller doesn't need to manage the timing for erasing or writing data.
* **Ready/Busy Signal:** During a write cycle, the Data Output (Q) pin can be used to poll the status of the chip to see if the internal write operation is complete.
* **Data Retention:** It is rated for more than 40 years of data retention.
* **Endurance:** It supports more than 1 million write cycles per byte.
* **Sequential Read:** It allows for reading the entire memory contents via a single command by continuing to provide clock pulses.
---
### 4. Part Number Breakdown: M93C74-RBN7
The suffix provides specific manufacturing details:
* **M93C74**: 8 Kbit Microwire EEPROM.
* **-R**: Range of operating voltage (1.8V to 5.5V).
* **BN**: PDIP8 package (EcoPack, Lead-Free).
* **7**: Device tested for the Industrial temperature range (-40 to +85°C) with specific reliability screening.
---
### 5. Typical Application Circuit
```arduino
// Basic Logic Connection
[MCU] [M93C74]
CS (Digital Out) -> Pin 1 (S)
MOSI(Digital Out) -> Pin 2 (D)
SCK (Clock Out) -> Pin 3 (C)
MISO(Digital In) <- Pin 4 (Q)
GND -> Pin 5 (Vss)
VCC (3.3V/5V) -> Pin 8 (Vcc)
```
- ⤷
What is the difference between Microwire and SPI protocols in this context?
- ⤷ How does the ORG pin change the memory addressing?
- ⤷ Can this chip be programmed using a standard Arduino?