AI

The **M60031GVK-R** is an integrated circuit, typically categorized as a **Voltage Supervisor / Reset IC** (or a Reset Generator). These components are essential in digital systems to ensure that microprocessors and microcontrollers start in a known state and are protected against brownout conditions.
---
## 1. Technical Specifications Overview
Below are the typical specifications associated with the M60031 series of voltage supervisors:
| Feature | Specification Details |
| :--- | :--- |
| **Component Type** | Microprocessor Reset Circuit / Voltage Supervisor |
| **Threshold Voltage** | Typically fixed (range varies by sub-model, e.g., 3.0V to 4.5V) |
| **Output Type** | Open-Drain or Push-Pull (Model dependent) |
| **Reset Timeout** | Typically 100ms to 500ms |
| **Package Type** | SOT-23, SOT-25, or SC-70 |
| **Operating Current** | Ultra-low (Microampere range) |
| **Mounting Type** | Surface Mount (SMD) |
---
## 2. Key Functions of the IC
The M60031GVK-R performs three primary tasks in an electronic circuit:
### A. Power-On Reset (POR)
When power is first applied to a device, the voltage is unstable for a brief moment. This IC holds the "Reset" line active until the voltage reaches a stable operating level and remains stable for a specific "timeout" period.
### B. Brownout Protection
If the power supply voltage drops below a safe threshold during operation, the IC triggers a reset to prevent the processor from executing corrupted instructions or performing "glitchy" logic operations.
### C. Manual Reset (If supported)
Some variants allow for a manual switch input to force a system reboot without cycling the power supply.
---
## 3. Pinout and Circuit Integration
While specific pinouts depend on the package (e.g., SOT-23), a standard 3-pin configuration usually follows this logic:
1. **VCC (Input):** Connected to the power supply being monitored.
2. **GND (Ground):** Common system ground.
3. **RESET (Output):** Connected to the RESET pin of the Microcontroller. Usually "Active Low."
### Typical Application Circuit
```text
[ Power Supply (3.3V) ]-----------+----------[ VCC Pin ]
|
[R] Pull-up resistor (if Open-Drain)
|
[ MCU RESET Pin ] <---------------+----------[ RESET Pin ]
|
[ Ground ] -----------------------+----------[ GND Pin ]
```
---
## 4. Part Number Decoding (Suffixes)
* **M60031**: The base part number / family series.
* **GVK**: Usually indicates the specific threshold voltage and package type (e.g., SOT-23).
* **-R**: Typically signifies **Tape and Reel** packaging for automated assembly.
---
## 5. Common Applications
* Microprocessor and Microcontroller systems.
* Consumer electronics (TVs, Routers, Smart Home devices).
* Industrial controllers.
* Battery-powered equipment.
- ⤷
What is the exact threshold voltage for the 'GVK' variant?
- ⤷ Is the output of this IC Active-High or Active-Low?
- ⤷ What are the direct pin-to-pin equivalents for the M60031 series?