M3A74FAG-R
AI

The **M3A74FAG-R** is a high-performance DDR4 Registered DIMM (RDIMM) memory module manufactured by **Micron Technology**. It is specifically designed for server and workstation environments that require high reliability and data integrity.
---
## 1. Technical Specifications
Below are the primary electronic and physical specifications for the M3A74FAG-R module:
| Feature | Specification |
| :--- | :--- |
| **Memory Type** | DDR4 SDRAM |
| **Capacity** | 128GB |
| **Module Type** | RDIMM (Registered DIMM) |
| **Speed** | PC4-23400 (DDR4-2933) |
| **Voltage** | 1.2V |
| **Rank** | 8Rx4 (Octal Rank) |
| **Error Correction** | ECC (Error-Checking and Correcting) |
| **CAS Latency** | CL21 |
| **Pin Count** | 288-Pin |
---
## 2. Key Electronic Components
### A. DRAM Chips (SDRAM)
The module utilizes Micron’s high-density DDR4 chips. These chips are organized in a **4-bit wide (x4)** configuration. Because it is an 8-rank module with 128GB capacity, it uses **3DS (Three-Dimensional Stacked)** technology, where multiple DRAM dies are stacked vertically using **TSV (Through-Silicon Via)** to increase density without increasing the physical footprint.
### B. Register Clock Driver (RCD)
As an **RDIMM**, this module features a Register (or buffer) located between the system memory controller and the DRAM chips.
* **Function:** It re-drives the control and address signals.
* **Benefit:** This reduces the electrical load on the system memory controller, allowing for higher capacities and more stable signals across the server motherboard.
### C. SPD EEPROM (Serial Presence Detect)
A small non-volatile memory chip located on the module.
* **Function:** It stores timing parameters, manufacturer data, and thermal specifications.
* **Operation:** The motherboard BIOS/UEFI reads this data via the $I^2C$ or $I^3C$ bus to automatically configure the memory settings.
### D. Power Management and Decoupling
* **Decoupling Capacitors:** Small Surface Mount Device (SMD) capacitors are placed near each DRAM chip to filter electrical noise and maintain voltage stability during high-speed switching.
* **VTT Termination:** On-die termination (ODT) is used to prevent signal reflection, which is critical at 2933MT/s speeds.
---
## 3. Advanced Electronic Features
### ECC (Error-Checking and Correcting)
The electronic circuitry includes extra bits used for parity. The system can detect and correct single-bit errors and detect multi-bit errors, preventing system crashes or data corruption in enterprise environments.
### Thermal Sensor
The module includes an integrated digital thermal sensor. This allows the server to monitor the memory temperature in real-time and adjust cooling (fan speeds) or throttle performance to prevent electronic damage from overheating.
---
## 4. Signal Integrity: 288-Pin Interface
The physical connection uses a "contoured" 288-pin edge connector. This design reduces the insertion force and ensures that the electrical contact for the high-speed data pins is consistent across the entire length of the slot.
- ⤷
What is the difference between RDIMM and LRDIMM in server applications?
- ⤷ How does 3DS TSV technology improve memory density?
- ⤷ Is this memory module compatible with standard consumer motherboards?