AI

The **HSP-20-R** is an electronic component primarily known as a **Piezoelectric Diaphragm** (or transducer), often manufactured by companies like Murata or similar electronic manufacturers. It is widely used in sound-producing circuits.
---
## 1. Technical Specifications
The "HSP" series usually denotes high-sound-pressure piezo elements. Below are the typical electronic characteristics:
| Parameter | Typical Value |
| :--- | :--- |
| **Resonant Frequency** | 6.0 kHz ± 0.5 kHz |
| **Resonant Impedance** | 500 $\Omega$ (Maximum) |
| **Capacitance** | 10,000 pF ~ 15,000 pF at 120Hz |
| **Input Voltage** | 30V p-p (Maximum) |
| **Operating Temperature** | -20°C to +70°C |
| **Diameter** | 20 mm |
---
## 2. Key Electronic Components & Structure
The HSP-20-R is not a complex integrated circuit; rather, it is an **electromechanical transducer** consisting of three main layers:
1. **Piezoelectric Ceramic:** A thin layer of lead zirconate titanate (PZT) that converts electrical signals into mechanical vibrations.
2. **Metal Plate (Substrate):** Usually made of brass or stainless steel. It provides structural integrity and acts as one of the electrodes.
3. **Silver Electrode:** A thin coating on the ceramic layer where the positive lead is usually soldered.
---
## 3. Operating Principle
The device operates on the **Reverse Piezoelectric Effect**:
* When an alternating current (AC) signal or a PWM (Pulse Width Modulation) signal is applied to the two electrodes, the ceramic material expands and contracts.
* This motion causes the metal plate to bend rapidly, creating pressure waves in the air, which we perceive as **sound**.
### Circuit Integration Example
To drive an HSP-20-R with a microcontroller (like an Arduino), you typically need a simple transistor circuit because the microcontroller pins cannot provide enough current/voltage for high volume.
```cpp
// Minimal code for a 6kHz Tone (Resonant Frequency)
int piezoPin = 9;
void setup() {
// No setup needed for tone()
}
void loop() {
tone(piezoPin, 6000); // 6000Hz is the resonant peak for HSP-20-R
delay(1000);
noTone(piezoPin);
delay(1000);
}
```
---
## 4. Typical Applications
* **Alarms:** Smoke detectors, digital watches, and handheld devices.
* **Feedback:** Key-click sounds in microwave ovens or calculators.
* **Sensors:** Because the effect works in reverse, they can be used as vibration or knock sensors.
- ⤷
How do I calculate the resonant frequency for a piezo circuit?
- ⤷ What is the difference between an active buzzer and a passive piezo diaphragm like the HSP-20-R?
- ⤷ Can the HSP-20-R be used as a contact microphone for acoustic instruments?