DPS50-M
AI

The **DPS50-M** is a high-precision, programmable DC step-down (Buck) power supply module. It is widely known for its compact size, digital control interface, and high efficiency.
Below is a breakdown of its primary electronic components and specifications.
---
### 1. Key Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Input Voltage Range** | 6.00V - 55.00V |
| **Output Voltage Range** | 0V - 50.00V |
| **Output Current Range** | 0A - 5.000A (Typical for M-series) |
| **Output Power Range** | 0 - 250W |
| **Voltage Resolution** | 0.01V |
| **Current Resolution** | 0.001A |
---
### 2. Internal Electronic Architecture
The DPS50-M utilizes a combination of analog power conversion and digital control.
#### A. The Buck Converter Circuit
At its core, the device is a **Synchronous Buck Converter**.
* **Power MOSFETs:** Low $R_{DS(on)}$ transistors are used to switch the input voltage at high frequencies.
* **Inductor:** A large toroidal or shielded inductor stores energy during the switching cycle to smooth the current.
* **Filter Capacitors:** High-quality electrolytic and ceramic capacitors at the input and output reduce voltage ripple and noise.
#### B. Digital Control Unit (MCU)
The "brain" of the unit is typically an **STM32** or similar 32-bit ARM Cortex microprocessor.
* **ADC (Analog-to-Digital Converter):** Samples the output voltage and current with high precision to provide real-time feedback.
* **PWM Control:** The MCU adjusts the Pulse Width Modulation signal sent to the MOSFET drivers to maintain a steady output despite load changes.
#### C. Human-Machine Interface (HMI)
* **LCD Display:** A 1.44-inch color TFT screen that displays set values, actual values, and limit status (CV/CC).
* **Digital Encoder:** Used for precise incremental adjustments of voltage and current.
---
### 3. Protection Features
The electronic design includes several safety "layers" implemented via firmware and hardware:
1. **OVP (Over Voltage Protection):** Shuts down output if the voltage exceeds the user-defined limit.
2. **OCP (Over Current Protection):** Limits or cuts power if the load draws too much current.
3. **OPP (Over Power Protection):** Ensures the total wattage does not exceed the hardware rating (e.g., 250W).
4. **Reverse Polarity Protection:** Usually present on the input side to prevent damage if wires are swapped.
---
### 4. Communication Interface
The "M" in DPS50-M often signifies communication capabilities. It typically features a dedicated header for:
* **USB Module:** To connect to a PC for remote control and data logging.
* **Bluetooth Module:** To control the power supply via a smartphone app.
---
- ⤷
What is the difference between CV (Constant Voltage) and CC (Constant Current) modes on this device?
- ⤷ Can I use the DPS50-M to charge Lithium-ion batteries safely?
- ⤷ What kind of input power source is recommended for the DPS50-M?