DM74LS155N
AI

## DM74LS155N: Dual 2-Line to 4-Line Decoder/Demultiplexer
The **DM74LS155N** is a high-performance Monolithic TTL (Transistor-Transistor Logic) integrated circuit. It is designed to function as a dual 2-to-4 line decoder or a 1-to-8 line demultiplexer.
### 1. Key Technical Specifications
| Parameter | Value |
| :--- | :--- |
| **Logic Family** | LS (Low-power Schottky) |
| **Supply Voltage (Vcc)** | 4.75V to 5.25V |
| **Number of Channels** | 2 |
| **Configuration** | Dual 2:4 or Single 1:8 |
| **Package Type** | 16-pin PDIP (Plastic Dual In-line Package) |
| **Operating Temperature** | 0°C to +70°C |
---
### 2. Functional Description
The device consists of two separate 2-line-to-4-line decoders with individual strobes (enable pins).
#### A. Dual 2-to-4 Decoder
In this mode, the chip takes a 2-bit binary input and activates one of the four outputs.
* **Decoder 1:** Uses an active-low strobe and an active-high data input.
* **Decoder 2:** Uses an active-low strobe and an active-low data input.
#### B. 1-to-8 Demultiplexer
By connecting the address lines together and utilizing the different polarities of the data inputs, the chip can be configured to function as a single 1-to-8 demultiplexer.
---
### 3. Pin Configuration (16-Pin DIP)
| Pin No. | Symbol | Function |
| :--- | :--- | :--- |
| 1, 2 | C1, C2 | Separate Data Inputs for Sections 1 & 2 |
| 3, 13 | G1, G2 | Strobe (Enable) Inputs (Active Low) |
| 4-7 | 1Y0-1Y3 | Outputs for Section 1 |
| 8 | GND | Ground |
| 9-12 | 2Y0-2Y3 | Outputs for Section 2 |
| 14, 15 | A, B | Common Address Inputs |
| 16 | Vcc | Positive Supply Voltage |
---
### 4. Typical Application Example
A common use case is memory address decoding where a CPU needs to select one of several memory chips based on a binary address.
```c
// Pseudo-logic for Address Selection
if (Address_A == LOW && Address_B == LOW) {
Output_0 = ACTIVE; // Selects first device
} else if (Address_A == HIGH && Address_B == LOW) {
Output_1 = ACTIVE; // Selects second device
}
```
---
### 5. Features
* **Low Power Dissipation:** Typically 30mW per gate.
* **High Speed:** Average propagation delay of 13ns.
* **Schottky Clamping:** Used to reduce internal storage time and increase switching speed.
- ⤷What is the difference between the 74LS155 and the 74LS156?
- ⤷ Can you provide a truth table for the 1-to-8 demultiplexer mode?
- ⤷ How do the 'active-high' and 'active-low' data inputs affect the wiring?