CTMC1210-R68K
AI

The **CTMC1210-R68K** is a surface-mount (SMD) molded chip inductor. It is part of the wire-wound inductor family, specifically designed for high-reliability applications and automated assembly.
---
## 1. Technical Specifications
Below are the primary electrical and physical characteristics of the component:
| Parameter | Specification |
| :--- | :--- |
| **Part Number** | CTMC1210-R68K |
| **Inductance** | 0.68 µH (Microhenries) |
| **Tolerance** | ±10% (Indicated by 'K') |
| **Case Size** | 1210 (EIA) / 3225 (Metric) |
| **Test Frequency** | 25.2 MHz |
| **DC Resistance (Max)** | ~0.45 Ω (Approx. depending on manufacturer) |
| **Rated Current (Max)** | ~450 mA |
| **Operating Temp** | -40°C to +105°C |
---
## 2. Part Number Breakdown
Understanding the nomenclature helps in identifying variants:
* **CTMC**: Series identifier (Molded Chip Inductor).
* **1210**: The physical footprint (0.12 x 0.10 inches).
* **R68**: The inductance value. "R" acts as a decimal point ($0.68$ µH).
* **K**: The tolerance code ($\pm 10\%$).
---
## 3. Key Electronic Characteristics
### A. Construction
The "Molded" design means the wire-wound coil is encapsulated in a hard plastic or resin body. This provides:
* **Mechanical Strength:** Protection against physical impact and vibration.
* **Environmental Resistance:** Protection against moisture and flux during the soldering process.
### B. Q Factor (Quality Factor)
This inductor is optimized for a specific **Q factor** at high frequencies. A higher Q indicates lower energy loss relative to the energy stored, which is critical for resonant circuits and filters.
### C. Self-Resonant Frequency (SRF)
Because it is a wire-wound component, it has parasitic capacitance. The SRF is the point where the inductor begins to behave like a capacitor. For a $0.68$ µH inductor, the SRF is typically very high (often $>200$ MHz), making it suitable for high-frequency RF applications.
---
## 4. Common Applications
Due to its size and stability, the CTMC1210-R68K is frequently used in:
1. **Filtering:** Removing high-frequency noise from power supply lines.
2. **RF Circuits:** Impedance matching and signal tuning in communication devices.
3. **DC/DC Converters:** Small-scale energy storage for step-up or step-down voltage modules.
4. **Consumer Electronics:** Used in tablets, laptops, and smart meters where PCB space is at a premium.
---
- ⤷
What is the difference between a molded inductor and a multilayer inductor?
- ⤷
How does the 'K' tolerance affect performance in a filter circuit?
- ⤷
Can this inductor be used in automotive high-temperature environments?