ATS-08D-101-C3-R0
AI

The **ATS-08D-101-C3-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic integrated circuits (ICs) like CPUs, GPUs, or power modules.
---
### 1. Key Technical Specifications
The part number follows a specific nomenclature that defines its physical and thermal characteristics.
| Feature | Specification |
| :--- | :--- |
| **Part Number** | ATS-08D-101-C3-R0 |
| **Heat Sink Type** | Push-Pin (Passive Cooling) |
| **Attachment Method** | Plastic Push-Pin with Brass Springs |
| **Dimensions** | 40mm x 40mm x 30mm |
| **Fin Style** | Straight (Aluminum) |
| **Thermal Resistance** | ~6.77°C/W (at 100 LFM) |
| **Material** | Aluminum (Blue Anodized) |
| **Interface Material** | T766 (Thermal Interface Material pre-applied) |
---
### 2. Design and Construction
This component is engineered to maximize surface area for air-to-solid heat exchange.
* **Fins:** It utilizes a **straight-fin** design. This is ideal for systems with clear, unidirectional airflow (forced convection).
* **Material:** Made from high-quality **Aluminum**. Aluminum is used because it offers a high thermal conductivity-to-weight ratio and is cost-effective compared to copper.
* **Anodization:** The "Blue Anodized" finish isn't just for aesthetics; it provides a protective layer against corrosion and slightly increases emissivity for better radiant heat transfer.
---
### 3. Mounting Mechanism (Push-Pin)
One of the defining "electronic parts" of this assembly is the mounting hardware:
1. **Push-Pins:** Plastic rivets that snap into pre-drilled holes (usually 3.0mm) on the Printed Circuit Board (PCB).
2. **Compression Springs:** These sit between the pin head and the heat sink. They ensure a constant, calibrated **downward pressure** on the electronic chip, which is critical for maximizing the effectiveness of the thermal paste.
3. **TIM (Thermal Interface Material):** The "C3" in the part number indicates a specific thermal pad or grease is pre-applied to the base, ensuring no air gaps exist between the chip and the aluminum.
---
### 4. Application Use Cases
The ATS-08D-101-C3-R0 is commonly found in:
* **Telecommunications:** Cooling networking switches and routers.
* **Embedded Systems:** Industrial PCs where high reliability is required.
* **Power Supplies:** Cooling MOSFETs or voltage regulators that generate significant heat during operation.
- ⤷
How do I calculate if this heat sink is sufficient for my chip's TDP?
- ⤷ What is the difference between the C1
- ⤷ C2
- ⤷ and C3 variants of this part?
- ⤷ Can the push-pins be replaced with screws for high-vibration environments?