AS07108PO-4-R
AI

The **AS07108PO-4-R** is a high-performance, miniature loudspeaker manufactured by **PUI Audio**. It is part of their "Slim-Line" series, designed for applications where space is limited but high-quality sound output is required.
---
### 1. Technical Specifications
The following table outlines the primary electrical and physical characteristics of the component:
| Feature | Specification |
| :--- | :--- |
| **Impedance** | 8 Ohms |
| **Power Rating (RMS)** | 0.7 Watts |
| **Power Rating (Max)** | 1.0 Watts |
| **Frequency Range** | 300 Hz ~ 20,000 Hz |
| **Sound Pressure Level (SPL)** | 84 dB @ 0.1W / 0.1M |
| **Resonant Frequency (Fo)** | 500 Hz |
| **Magnet Material** | Neodymium (NdFeB) |
| **Cone Material** | PEEK (Polyetheretherketone) |
| **Weight** | ~1.6 Grams |
---
### 2. Key Design Features
* **Neodymium Magnet:** Utilizes high-strength Neodymium magnets to achieve a high SPL (Sound Pressure Level) despite its small footprint.
* **PEEK Diaphragm:** The use of Polyetheretherketone for the cone allows for a wide frequency response and durability against environmental factors like heat and moisture.
* **Slim Profile:** The "07" in the part number often refers to the height (approx. 3.8mm to 4mm), making it ideal for thin handheld devices.
* **Rectangular Form Factor:** Measuring roughly 10mm x 7mm, it fits easily into the edges of PCB layouts.
---
### 3. Application Use Cases
This component is typically found in modern electronics that require audio feedback or voice communication in a compact form:
1. **Handheld Devices:** Smartwatches, scanners, and GPS units.
2. **Medical Instrumentation:** Portable monitors and diagnostic equipment requiring audible alerts.
3. **IoT Devices:** Smart home sensors and compact security hubs.
4. **Industrial Handhelds:** Rugged tablets or communication radios.
---
### 4. Integration Considerations
* **Mounting:** The part usually features solder pads for direct wire attachment or spring contact integration.
* **Enclosure Design:** To achieve the best bass response (near the 500Hz resonant frequency), the speaker should be mounted in a sealed or ported back-cavity.
* **Amplifier Matching:** Ensure the audio amplifier is rated for an 8-ohm load and does not exceed 0.7W continuous power to prevent voice coil burnout.
- ⤷
What is the recommended enclosure volume for the AS07108PO-4-R to optimize bass response?
- ⤷ How does PEEK cone material compare to paper or mylar in terms of longevity?
- ⤷ What are the soldering temperature limits for the contact pads on this speaker?