AS07004PO-WR-R
AI

The **AS07004PO-WR-R** is a high-quality miniature speaker manufactured by **PUI Audio**. It belongs to their "AS" series and is specifically designed for high-fidelity audio output in small-form-factor electronic devices.
---
## 1. Technical Specifications
The following table summarizes the primary electrical and physical characteristics of the component:
| Feature | Specification |
| :--- | :--- |
| **Speaker Type** | Dynamic, Permanent Magnet |
| **Impedance** | 4 Ohms |
| **Power Rating (Nominal)** | 3.0 Watts |
| **Power Rating (Maximum)** | 4.0 Watts |
| **Frequency Range** | 200 Hz ~ 20,000 Hz |
| **Sensitivity (SPL)** | 84 dB @ 1W/0.5m |
| **Resonant Frequency (Fo)** | 350 Hz |
| **Mounting Type** | Flange Mount / Surface |
| **Dimensions** | 70mm x 31mm (Approx.) |
---
## 2. Key Features and Construction
The "WR" in the part number typically denotes specific environmental or design enhancements:
### A. Material Composition
* **Cone Material:** Usually features a poly or paper-based cone with a rubber surround for better excursion and bass response.
* **Magnet:** Utilizes a high-energy Neodymium (NdFeB) magnet to maintain a slim profile while providing high output.
### B. "WR" Designation (Water Resistant)
* This model is designed to be **Water Resistant**. It often features a treated cone or a gasket system that protects the internal voice coil from moisture and dust, making it suitable for outdoor or industrial handheld devices.
### C. Audio Profile
* Unlike standard buzzers, this is a **full-range speaker**. It is capable of reproducing human speech and music with high clarity across the 200Hz to 20kHz spectrum.
---
## 3. Common Applications
Due to its slim rectangular shape and water resistance, it is commonly found in:
1. **Medical Devices:** Monitoring equipment that requires audible alarms and voice prompts.
2. **Kiosks & Point-of-Sale:** Outdoor vending machines or payment terminals.
3. **Smart Home Devices:** Video doorbells or security panels.
4. **Industrial Handhelds:** Ruggedized scanners and communication radios.
---
## 4. Implementation Example
To drive this speaker using a microcontroller (like an Arduino or ESP32), you cannot connect it directly to a GPIO pin. You must use an **Audio Amplifier IC** (e.g., PAM8403).
```cpp
// Example: Driving a 4-ohm speaker using a Class D Amplifier
// Pin Connections:
// MCU -> DAC Pin -> Amplifier Input
// Amplifier Output -> AS07004PO-WR-R (+ and -)
void setup() {
// Initialize I2S or DAC for audio playback
}
void loop() {
// Play 44.1kHz WAV file or Tone
}
```
- ⤷What is the IP rating for the water resistance on this speaker?
- ⤷ How does a 4-ohm impedance affect the choice of audio amplifier?
- ⤷ Are there smaller alternatives in the PUI Audio AS series?