ADCMP356
AI

## Overview of the ADCMP356
The **ADCMP356** is a low-power voltage comparator with an integrated reference, designed primarily for power supply monitoring and system reset applications. It is part of a family of comparators known for their small footprint and high integration.
---
### 1. Key Internal Components
The ADCMP356 integrates several discrete functions into a single 4-lead SC70 package:
| Component | Description |
| :--- | :--- |
| **Precision Reference** | Provides a stable internal 0.6 V threshold reference. |
| **Comparator Core** | Compares the input voltage at the `VIN` pin against the 0.6 V internal reference. |
| **Open-Drain Output** | The output stage requires an external pull-up resistor, allowing for level shifting or "wired-OR" logic. |
| **Hysteresis Logic** | Includes built-in hysteresis to prevent output chatter due to noise. |
---
### 2. Technical Specifications
Below are the critical electronic characteristics for circuit design:
| Parameter | Value |
| :--- | :--- |
| **Supply Voltage ($V_{CC}$)** | 2.25 V to 5.5 V |
| **Threshold Voltage ($V_{TH}$)** | 0.6 V (Fixed internal) |
| **Threshold Accuracy** | ±1.5% |
| **Supply Current** | ~10 µA (Typical) |
| **Output Type** | Open-Drain (Active-Low) |
| **Propagation Delay** | ~5 µs |
---
### 3. Pin Configuration and Functions
The device is typically found in a 4-lead SC70 package:
1. **$V_{IN}$ (Non-Inverting Input):** The monitored voltage is applied here (usually via a resistor divider).
2. **GND:** Ground reference.
3. **$\overline{OUT}$ (Output):** Open-drain output. It pulls low when $V_{IN}$ is below 0.6 V.
4. **$V_{CC}$:** Power supply input.
---
### 4. Application Example: Voltage Monitoring
To monitor a rail higher than 0.6 V (e.g., a 3.3 V rail), a simple voltage divider is used at the $V_{IN}$ pin.
```python
# Formula to calculate resistor divider for a specific Trip Point (V_trip):
# V_in = V_trip * (R2 / (R1 + R2))
# Since internal reference is 0.6V:
# 0.6 = V_trip * (R2 / (R1 + R2))
```
#### Typical Implementation Steps:
1. **Voltage Divider:** Set $R1$ and $R2$ so that $V_{IN}$ drops to 0.6 V when the monitored rail reaches its critical low limit.
2. **Pull-up Resistor:** Connect a resistor (typically 10kΩ to 100kΩ) from the $\overline{OUT}$ pin to the logic supply of your microcontroller or FPGA.
3. **Capacitance:** Place a 0.1 µF decoupling capacitor near the $V_{CC}$ pin to minimize noise.
---
### 5. Notable Features
* **Low Power Consumption:** Its 10 µA current draw makes it ideal for battery-operated devices.
* **Active Low Logic:** The output stays low when the monitored voltage is "invalid" (below 0.6 V), which is the standard for "Reset" signals.
* **Space Efficient:** The SC70 package is significantly smaller than standard SOT-23 packages.
- ⤷How do I calculate the resistor values for a 5V monitoring circuit using ADCMP356?
- ⤷ What is the difference between the ADCMP356 and ADCMP350?
- ⤷ Can the ADCMP356 be used for over-voltage protection?