1210F-R68
AI

The part number **1210F-R68** typically refers to a **Surface Mount Device (SMD) Power Inductor**. This component is widely used in power management circuits to store energy in a magnetic field.
Below is a detailed breakdown of its specifications and characteristics.
---
### 1. Part Number Deciphering
The nomenclature of this component usually follows a standard industry format:
| Segment | Meaning | Description |
| :--- | :--- | :--- |
| **1210** | Case Size | Dimensions are approximately 0.12 x 0.10 inches (3.2 x 2.5 mm). |
| **F** | Tolerance | Typically denotes a $\pm1 \%$ or $\pm1.5 \%$ tolerance (manufacturer dependent). |
| **R68** | Inductance Value | "R" acts as a decimal point. $0.68\ \mu\text{H}$ (microhenries). |
---
### 2. Technical Specifications
While exact specs vary by manufacturer (such as Murata, TDK, or Bourns), a typical **1210F-R68** inductor features:
* **Inductance:** $0.68\ \mu\text{H}$.
* **Operating Temperature:** Generally $-40^{\circ}\text{C}$ to $+125^{\circ}\text{C}$.
* **DC Resistance (DCR):** Low resistance to minimize power loss (usually in the milliohm range).
* **Rated Current:** The maximum current it can handle before reaching a specific temperature rise or saturation.
---
### 3. Key Applications
This specific inductor size and value are commonly found in:
1. **DC-DC Converters:** Used for voltage regulation in mobile devices.
2. **EMI Filtering:** Suppressing high-frequency noise in power lines.
3. **Signal Conditioning:** Decoupling and filtering in communication equipment.
---
### 4. Typical Footprint (Dimensions)
The **1210** package is a standard metric **3225** size.
| Dimension | Inches | Metric (mm) |
| :--- | :--- | :--- |
| Length (L) | 0.126 | 3.20 |
| Width (W) | 0.098 | 2.50 |
| Height (H) | Varies | 1.10 - 2.50 |
---
### 5. Selection Considerations
When replacing or designing with this part, keep the following in mind:
* **Saturation Current ($I_{sat}$):** Ensure the peak circuit current does not exceed the point where inductance drops significantly.
* **Self-Resonant Frequency (SRF):** The inductor should operate well below its SRF to maintain inductive behavior.
* **Material:** Usually ferrite-based for high efficiency.
- ⤷What is the difference between an unshielded and a shielded 1210 inductor?
- ⤷ How do I calculate the ripple current for a 0.68uH inductor?
- ⤷ Which manufacturers are the primary suppliers for the 1210F series?