7--59683--6 datasheet(2/7 Pages) TEC

Nome de Peças	7--59683--6

Descrição Electrónicos	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.

PDF	7 Pages

Scroll/Zoom	100%

Fabricante Electrônico	TEC [TE Connectivity Ltd]

Página de início	http://www.te.com/usa-en/home.html

Logo

2 / 7 page

408- 10040

Rev E

2

of 7

HAND TOOL

WIRE

DOT

HANDLE COLOR

TERMINAL COLOR CODE

STRIP LENGTH

HAND TOOL

PART

NUMBER

WIRE

SIZE

(AWG)

DOT

CODE

HANDLE COLOR

CODE

HIGH

TEMP.

LOW TEMP.

Min.

Max.

576778

24--22

2Dots

1 Handle Black

1 Handle Brown

Brown

Black

5.56 [.219]

6.35 [.250]

576779

20

1Dot

1 Handle Gray

1 Handle Purple

Gray

Purple

(With Black Stripe)

5.56 [.219]

6.35 [.250]

576780

18

2Dots

1 Handle Orange

1 Handle Black

Orange

(With Black Stripe)

5.56 [.219]

6.35 [.250]

576781

16

1Dot

2 Handles Orange

Orange

(With Black Stripe)

5.56 [.219]

6.35 [.250]

576782

14

2Dots

1 Handle White

1 Handle Black

White

(With Black Stripe)

5.56 [.219]

6.35 [.250]

576783

12

1Dot

2 Handles White

White

(With Black Stripe)

5.56 [.219]

6.35 [.250]

576784

10

1Dot

2 Handles Black

Black

------

7.62 [.300]

8.38 [.330]

Figure 2

3. CRIMPING PROCEDURE

Refer toSection5for informationonthe

insulation crimp adjustment.

Refer to Figure 3 and the following steps for terminal

crimping procedures.

Figure 3

PIDG STRATO-THERM Terminals

Locator

Wire Barrel Butts

Against Locator

End of Conductor

Butts Against

Locator

Insulation Barrel

Wire Barrel

1. Strip the wire to the dimension provided in

Figure 2, being careful to avoid nicking or

damaging the conductor(s).

Do NOT use wire with nicked or missing

conductors.

Make sure terminal insulation color code matches

tool handle color.

2. Open the tool jaws by closing the tool handles

until the ratchet releases, then allow the handles to

open fully.

3. Place the terminal in the dies so that the wire

barrel butts against the locator.

4. Close the tool handles until the terminal is held

firmly in place. Do NOT deform the terminal.

5. Insert properly stripped wire into the terminal

until the end of the conductor butts against the

locator.

Do NOT allow wire insulation to enter the

terminal wire barrel.

6. Complete the crimp by closing the tool handles

until the ratchet releases.

7. Release the tool handles, allow the handles to

open fully, and remove the crimped terminal.

8. Observe the dot code on the finished crimp to

ensure that the correct terminal and tool

combination was used. See Figure 2.

9. Refer to Section 4 and Figure 4 for terminal

crimp inspection procedure.

NOTE

i

CAUTION

!

NOTE

i

CAUTION

!

Descrição semelhante - 7--59683--6

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
TE Connectivity Ltd	408-1216	91Kb / 2P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
Tyco Electronics	408-9935	247Kb / 6P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Tyco Electronics	408-8607	247Kb / 6P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
TE Connectivity Ltd	408-9359	210Kb / 7P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
	408-10110	191Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
	408-6561	110Kb / 4P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Tyco Electronics	408-9039	103Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
	408-9240	85Kb / 3P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
	408-8377	249Kb / 6P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
	408-10324	239Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
	411-3236	216Kb / 5P	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.

More results

7--59683--6 Folha de dados(PDF) 2 Page - TE Connectivity Ltd

7--59683--6 Folha de dados(HTML) 2 Page - TE Connectivity Ltd

Descrição semelhante - 7--59683--6

Html Pages

1 2 3 4 5 6 7

Folha de dados Download

Ligação URL