408-10022 datasheet(2/2 Pages) MACOM

Nome de Peças	408-10022

Descrição Electrónicos	Die Assembly

PDF	2 Pages

Scroll/Zoom	100%

Fabricante Electrônico	MACOM [Tyco Electronics]

Página de início	http://www.macom.com

Logo

2 / 2 page

408- 10022

Die Assembly 1804018- 1

Rev B

2

of 2

Tyco Electronics Corporation

5.1. Maintenance

1. Remove dust, moisture, and other contaminants

with a clean, soft brush, or a clean, soft, lint--free

cloth. DO NOT use any objects that could damage

the dies or tool.

2. Make sure that the retaining screws are properly

secured.

3. When the dies are not in use, store them in a

clean, dry area.

5.2. Inspection

1. Remove all lubrication and accumulated film

from the dies by immersing the dies in a suitable

commercial degreaser.

2. Make certain that all retaining screws and die

components are properly secured.

3. Inspect the crimping surfaces for flattened,

chipped, worn, or cracked areas. If damage is

evident, the dies must be replaced. Refer to

Section 8, REPLACEMENT.

5.3. Measuring the Die Opening

Measure the die opening to ensure that it meets the

dimensions given in Figure 2.

6. REPLACEMENT

Customer--replaceable parts are given in Figure 1.

A complete inventory should be stocked and

controlled to prevent lost time when replacement of

parts is necessary. Order replacement parts through

your representative, or call 1--800--526--5142, or send

a facsimile of your purchase order to 717--986--7605,

or write to:

CUSTOMER SERVICE (038--035)

TYCO ELECTRONICS CORPORATION

PO BOX 3608

HARRISBURG PA 17105--3608

Figure 2

9.40 +0.03

[.370+.001]

11.87 +0.03

[.466+.001]

Note:

Not to Scale

7. REVISION SUMMARY

Revisions to this instruction sheet include:

S

Updated instruction sheet to corporate

requirements

S

Removed obsolete product from Figure 1

S

Added installation of pins to Steps 2 and 3 of

Section 3

S

Modified Section 6

Nº de peça semelhante - 408-10022

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
TE Connectivity Ltd	408-10020	126Kb / 3P	Extraction/Lance Reset Tool
Tyco Electronics	408-10021	530Kb / 5P	The CERTI--CRIMP II Tool Holder Assembly
Tyco Electronics	408-10029	237Kb / 9P	Reasons for reissue are provided in Section 8, REVISION SUMMARY.

More results

Descrição semelhante - 408-10022

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
Tyco Electronics	58524-2	241Kb / 5P	PRO-CRIMPER III Hand Crimping Tool Assembly 58524- 1 with Die Assembly 58524- 2
TE Connectivity Ltd	408-9736	225Kb / 4P	STRATO-THERM Die Head Assembly
TE Connectivity Ltd	408-4064	383Kb / 5P	PRO-CRIMPER III Hand Crimping Tool Assembly And Die Set
Tyco Electronics	408-4116	130Kb / 4P	Crimping Die Assembly
TE Connectivity Ltd	408-9167	408Kb / 5P	Crimping Die Assembly
Tyco Electronics	408-8697	697Kb / 3P	Each die assembly consists of a nest die and an anvil die.
Tyco Electronics	408-8737	120Kb / 2P	The die assembly consists of an indenter die and nest die. Each die is held in the tool by a single screw
TE Connectivity Ltd	408-32122	478Kb / 4P	The die assembly features an anvil die and a crimper die
Molex Electronics Ltd.	638405000	241Kb / 4P	TERMINATOR DIE ASSEMBLY 03/03/95
Molex Electronics Ltd.	638405200	234Kb / 4P	TERMINATOR DIE ASSEMBLY 03/07/95

More results

408-10022 Folha de dados(PDF) 2 Page - Tyco Electronics

408-10022 Folha de dados(HTML) 2 Page - Tyco Electronics

Nº de peça semelhante - 408-10022

Descrição semelhante - 408-10022

Html Pages

1 2

Folha de dados Download

Ligação URL