PIC16F87XATISLASHML datasheet(169/234 Pages) MICROCHIP

169 / 234 page

 2001-2013 Microchip Technology Inc.

DS39582C-page 169

PIC16F87XA

16.9

MPLAB ICE 2000

High Performance Universal

In-Circuit Emulator

The MPLAB ICE 2000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for PIC

microcontrollers. Software control of the MPLAB ICE

2000 in-circuit emulator is advanced by the MPLAB

Integrated Development Environment, which allows

editing, building, downloading and source debugging

from a single environment.

The MPLAB ICE 2000 is a full-featured emulator sys-

tem with enhanced trace, trigger and data monitoring

features. Interchangeable processor modules allow the

system to be easily reconfigured for emulation of differ-

ent processors. The universal architecture of the

MPLAB ICE in-circuit emulator allows expansion to

support new PIC microcontrollers.

The MPLAB ICE 2000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

16.10 MPLAB ICE 4000

High Performance Universal

In-Circuit Emulator

The MPLAB ICE 4000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for high-

end PIC microcontrollers. Software control of the

MPLAB ICE in-circuit emulator is provided by the

MPLAB Integrated Development Environment, which

allows editing, building, downloading and source

debugging from a single environment.

The MPLAB ICD 4000 is a premium emulator system,

providing the features of MPLAB ICE 2000, but with

increased emulation memory and high speed perfor-

mance for dsPIC30F and PIC18XXXX devices. Its

advanced emulator features include complex triggering

and timing, up to 2 Mb of emulation memory, and the

ability to view variables in real-time.

The MPLAB ICE 4000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft Windows 32-bit operating system were cho-

sen to best make these features available in a simple,

unified application.

16.11 MPLAB ICD 2 In-Circuit Debugger

Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a

powerful,

low-cost,

run-time

development

tool,

connecting to the host PC via an RS-232 or high-speed

USB interface. This tool is based on the Flash PIC

MCUs and can be used to develop for these and other

PIC microcontrollers. The MPLAB ICD 2 utilizes the in-

circuit debugging capability built into the Flash devices.

This feature, along with Microchip’s In-Circuit Serial

ProgrammingTM (ICSPTM) protocol, offers cost effective

in-circuit Flash debugging from the graphical user inter-

face

the

MPLAB

Integrated

Development

Environment. This enables a designer to develop and

debug source code by setting breakpoints, single-

stepping and watching variables, CPU status and

peripheral registers. Running at full speed enables test-

ing hardware and applications in real-time. MPLAB

ICD 2 also serves as a development programmer for

selected PIC devices.

16.12 PRO MATE II Universal Device

Programmer

The PRO MATE II is a universal, CE compliant device

programmer with programmable voltage verification at

VDDMIN and VDDMAX for maximum reliability. It features

an LCD display for instructions and error messages

and a modular detachable socket assembly to support

various package types. In Stand-Alone mode, the

PRO MATE II device programmer can read, verify, and

program PIC devices without a PC connection. It can

also set code protection in this mode.

16.13 PICSTART Plus Development

Programmer

The PICSTART Plus development programmer is an

easy-to-use, low-cost, prototype programmer. It con-

nects to the PC via a COM (RS-232) port. MPLAB

Integrated Development Environment software makes

using the programmer simple and efficient. The

PICSTART Plus development programmer supports

most PIC devices up to 40 pins. Larger pin count

devices, such as the PIC16C92X and PIC17C76X,

may be supported with an adapter socket. The

PICSTART Plus development programmer is CE

compliant.

PIC16F87XATI/ML Folha de dados(PDF) 169 Page - Microchip Technology

PIC16F87XATI/ML Folha de dados(HTML) 169 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL