41594B datasheet(296/372 Pages) MICROCHIP

Nome de Peças	41594B

Descrição Electrónicos	8-Bit Flash Microcontroller with nanoWatt XLP Technology

PDF	372 Pages

Scroll/Zoom	100%

Fabricante Electrônico	MICROCHIP [Microchip Technology]

Página de início	http://www.microchip.com

Logo

296 / 372 page

PIC12LF1840T48A

DS41594B-page 296

Preliminary

 2011-2012 Microchip Technology Inc.

27.7.3

FREQUENCY THRESHOLD

The frequency threshold should be placed midway

between the value of nominal frequency and the

reduced frequency of the capacitive sensing oscillator.

Refer to Application Note AN1103, “Software Handling

for Capacitive Sensing” (DS01103) for more detailed

information on the software required for CPS module.

27.8

Operation during Sleep

The capacitive sensing oscillator will continue to run as

long as the module is enabled, independent of the part

being in Sleep. In order for the software to determine if

a frequency change has occurred, the part must be

awake. However, the part does not have to be awake

when the timer resource is acquiring counts.

Note:

For more information on general capacitive

sensing refer to Application Notes:

• AN1101, “Introduction to Capacitive

Sensing” (DS01101)

• AN1102, “Layout and Physical

Design Guidelines for Capacitive

Sensing” (DS01102)

Note:

Timer0 does not operate when in Sleep,

and therefore, cannot be used for

capacitive sense measurements in Sleep.

41594B Folha de dados(PDF) 296 Page - Microchip Technology