SPECIFICATION CONTROL DRAWING

THERMOFIT

DEVICES

Raychem Corporation

300 Constitution Drive

Menlo Park, CA 94025

USA

TITLE:

SOLDERSLEEVE*

SHIELD TERMINATOR

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE IN BETWEEN BRACKETS.

DOCUMENT NO.:

D-142-6X

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

Raychem reserves the right to amend this

drawing at any time. Users should

evaluate the suitability of the product for

their application.

DCR NUMBER:

D981311

REPLACES:

D961394

DRAWN BY:

R. MAPALO

DATE:

07/14/98

REV.:

SEE TABLE

DOC ISSUE:

2

SCALE:

NONE

SIZE:

A

SHEET:

1 of 1

If this document is printed it becomes uncontrolled. Check for the latest revision

Product Revisions

Product Dimensions

Cable Dimensions

Part Name

A

min

B

min

L

max

D

max

E

min

J

±1.3

(.05)

D-142-65

F

10.80

(.425)

11.65

(.460)

29.75

11.4

(.450)

5.7

(.225)

9.4

D-142-66

D

13.35

(.525)

13.84

(.545)

(1.170)

13.6

(.535)

8.9

(.350)

(.370)

MATERIAL

1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Natural.

2. SOLDER PREFORM WITH FLUX:

SOLDER: TYPE Cd18 per ANSI J-STD-006.

FLUX:

TYPE ROL1 per ANSI J-STD-004.

3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue.

4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: Natural.

APPLICATION

1. These parts are designed to provide an environment protected shield termination on cables, rated for 105

°C minimum, meeting

the dimensional criteria listed and having tin or silver plated shields.

2. Temperature range: -55

°C to +125°C.

3. Install using Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70.

4. Assemblies will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747.

For best results, prepare the cable as shown:

*A trademark of Raychem Corporation.