AT90PWM2 datasheet(279/361 Pages) ATMEL

279 / 361 page

279

4317J–AVR–08/10

AT90PWM2/3/2B/3B

Notes:

1. “1” means unprogrammed, “0” means programmed.

Notes:

1. Program the Fuse bits and Boot Lock bits before programming the LB1 and LB2.

2. “1” means unprogrammed, “0” means programmed

Notes:

1. Program the Fuse bits and Boot Lock bits before programming the LB1 and LB2.

2. “1” means unprogrammed, “0” means programmed

Table 25-2.

Lock Bit Protection Modes

(1)(2)

Memory Lock Bits

Protection Type

LB Mode

LB2

LB1

No memory lock features enabled.

Further programming of the Flash and EEPROM is disabled in

Parallel and Serial Programming mode. The Fuse bits are

locked in both Serial and Parallel Programming mode.(1)

Further programming and verification of the Flash and

EEPROM is disabled in Parallel and Serial Programming mode.

The Boot Lock bits and Fuse bits are locked in both Serial and

Parallel Programming mode.(1)

Table 25-3.

Lock Bit Protection Modes

(1)(2).

BLB0 Mode

BLB02

BLB01

No restrictions for SPM or LPM accessing the Application

section.

SPM is not allowed to write to the Application section.

SPM is not allowed to write to the Application section, and LPM

executing from the Boot Loader section is not allowed to read

from the Application section. If Interrupt Vectors are placed in

the Boot Loader section, interrupts are disabled while executing

from the Application section.

LPM executing from the Boot Loader section is not allowed to

read from the Application section. If Interrupt Vectors are placed

in the Boot Loader section, interrupts are disabled while

executing from the Application section.

BLB1 Mode

BLB12

BLB11

No restrictions for SPM or LPM accessing the Boot Loader

section.

SPM is not allowed to write to the Boot Loader section.

SPM is not allowed to write to the Boot Loader section, and LPM

executing from the Application section is not allowed to read

from the Boot Loader section. If Interrupt Vectors are placed in

the Application section, interrupts are disabled while executing

from the Boot Loader section.

LPM executing from the Application section is not allowed to

read from the Boot Loader section. If Interrupt Vectors are

placed in the Application section, interrupts are disabled while

executing from the Boot Loader section.

AT90PWM2 Folha de dados(PDF) 279 Page - ATMEL Corporation

AT90PWM2 Folha de dados(HTML) 279 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL