ATtiny48 datasheet(174/266 Pages) ATMEL

Nome de Peças	ATtiny48

Descrição Electrónicos	8-bit Microcontroller with 4/8K Bytes In-System Programmable Flash

PDF	266 Pages

Scroll/Zoom	100%

Fabricante Electrônico	ATMEL [ATMEL Corporation]

Página de início	http://www.atmel.com

Logo

174 / 266 page

174

8008C–AVR–03/09

ATtiny48/88

trigger signal. If ADEN in ADCSRA is set, this will start a conversion. Switching to Free Running

mode (ADTS[2:0]=0) will not cause a trigger event, even if the ADC Interrupt Flag is set

17.13.5

DIDR0 – Digital Input Disable Register 0

• Bit 7:0 – ADC7D..ADC0D: ADC7..0 Digital Input Disable

When this bit is written logic one, the digital input buffer on the corresponding ADC pin is dis-

abled. The corresponding PIN Register bit will always read as zero when this bit is set. When an

analog signal is applied to the ADC7..0 pin and the digital input from this pin is not needed, this

bit should be written logic one to reduce power consumption in the digital input buffer.

Table 17-6.

ADC Auto Trigger Source Selections

ADTS2

ADTS1

ADTS0

Trigger Source

Free Running mode

Analog Comparator

External Interrupt Request 0

Timer/Counter0 Compare Match A

Timer/Counter0 Overflow

Timer/Counter1 Compare Match B

Timer/Counter1 Overflow

Timer/Counter1 Capture Event

Bit

ADC7D

ADC6D

ADC5D

ADC4D

ADC3D

ADC2D

ADC1D

ADC0D

DIDR0

Read/Write

R/W

Initial Value

ATtiny48 Folha de dados(PDF) 174 Page - ATMEL Corporation