ATMEGA329P_1 datasheet(17/385 Pages) ATMEL

Nome de Peças	ATMEGA329P

Descrição Electrónicos	8-bit Microcontroller with 32K Bytes In-System Programmable Flash

PDF	385 Pages

Scroll/Zoom	100%

Fabricante Electrônico	ATMEL [ATMEL Corporation]

Página de início	http://www.atmel.com

Logo

17 / 385 page

17

8021E–AVR–07/09

ATmega329P/3290P

When using the SEI instruction to enable interrupts, the instruction following SEI will be exe-

cuted before any pending interrupts, as shown in this example.

6.8.1

Interrupt Response Time

The interrupt execution response for all the enabled AVR interrupts is four clock cycles mini-

mum. After four clock cycles the program vector address for the actual interrupt handling routine

is executed. During this four clock cycle period, the Program Counter is pushed onto the Stack.

The vector is normally a jump to the interrupt routine, and this jump takes three clock cycles. If

an interrupt occurs during execution of a multi-cycle instruction, this instruction is completed

before the interrupt is served. If an interrupt occurs when the MCU is in sleep mode, the interrupt

execution response time is increased by four clock cycles. This increase comes in addition to the

start-up time from the selected sleep mode.

A return from an interrupt handling routine takes four clock cycles. During these four clock

cycles, the Program Counter (two bytes) is popped back from the Stack, the Stack Pointer is

incremented by two, and the I-bit in SREG is set.

Assembly Code Example

sei

; set Global Interrupt Enable

sleep

; enter sleep, waiting for interrupt

; note: will enter sleep before any pending

; interrupt(s)

C Code Example

__enable_interrupt(); /* set Global Interrupt Enable */

__sleep(); /* enter sleep, waiting for interrupt */

/* note: will enter sleep before any pending interrupt(s) */

Nº de peça semelhante - ATMEGA329P_1

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
ATMEL Corporation	ATMEGA329P	734Kb / 427P	High Performance, Low Power Atmel

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
ATMEL Corporation	ATMEGA325P	346Kb / 25P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA325P	3Mb / 336P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA329P	471Kb / 25P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA325P	332Kb / 22P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA324PA	546Kb / 24P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA32A	427Kb / 18P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA32	5Mb / 346P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA32A	518Kb / 18P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA328P	5Mb / 345P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash
	ATMEGA32A	6Mb / 352P	8-bit Microcontroller with 32K Bytes In-System Programmable Flash