| Os motores de busca de Datasheet de Componentes eletrônicos |
|
H8S/2111B Folha de dados(PDF) 122 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2111B Folha de dados(HTML) 122 Page - Renesas Technology Corp |
|
122 / 582 page ![]() Rev. 1.00, 05/04, page 88 of 544 5.7.3 Operation If the CPU prefetches an address specified in BAR by setting ABRKCR and BAR, an address break interrupt can be generated. This address break function generates an interrupt request to the interrupt controller at prefetch, and determines the priority by the interrupt controller. When an interrupt is accepted, an interrupt exception handling is activated after the current instruction has been completed. Note that the interrupt mask control according to the I and UI bits in CCR of the CPU is invalid to an address break interrupt. To use the address break function, set each register as follows: 1. Set a break address in the A23 to A1 bits in BAR. 2. Set the BIE bit in ABRKCR to 1 to enable the address break. When the BIE bit is cleared to 0, an address break is not requested. When the setting conditions are satisfied, the CMF flag in ABRKCR is set to 1 to request an interrupt. The interrupt source should be determined by the interrupt handling routine if necessary. 5.7.4 Usage Notes 1. In an address break, the break address should be an address where the first byte of the instruction exists. Otherwise, a break condition will not be satisfied. 2. In normal mode, addresses A23 to A16 are not compared. 3. When the branch instructions (Bcc, BSR), jump instructions (JMP, JSR), RST instruction, and RTE instruction are placed immediately prior to the address specified by BAR, a prefetch signal to the address may be output to request an address break by executing these instruction. It is necessary to take countermeasures: do not set a break address to an address immediately after these instructions, or determine whether interrupt handling is performed by satisfaction of a normal condition. 4. An address break interrupt is generated by combining the internal prefetch signal and an address. Therefore, the timing to enter the interrupt exception handling differs according to the instructions at the specified and at prior addresses and execution cycles. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |