Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

H8S/2117R Folha de dados(PDF) 156 Page - Renesas Technology Corp

Nome de Peças H8S/2117R
Descrição Electrónicos  16-Bit Single-Chip Microcomputer H8S Family / H8S/2100 Series
PDF  1024 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  RENESAS [Renesas Technology Corp]
Página de início  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2117R Folha de dados(HTML) 156 Page - Renesas Technology Corp

Back Button H8S/2117R Datasheet HTML 152Page - Renesas Technology Corp H8S/2117R Datasheet HTML 153Page - Renesas Technology Corp H8S/2117R Datasheet HTML 154Page - Renesas Technology Corp H8S/2117R Datasheet HTML 155Page - Renesas Technology Corp H8S/2117R Datasheet HTML 156Page - Renesas Technology Corp H8S/2117R Datasheet HTML 157Page - Renesas Technology Corp H8S/2117R Datasheet HTML 158Page - Renesas Technology Corp H8S/2117R Datasheet HTML 159Page - Renesas Technology Corp H8S/2117R Datasheet HTML 160Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 156 / 1024 page
background image
Section 5 Interrupt Controller
Rev. 1.00 Apr. 28, 2008 Page 130 of 994
REJ09B0452-0100
5.8.2
Instructions for Disabling Interrupts
The instructions that disable interrupts are LDC, ANDC, ORC, and XORC. After any of these
instructions are executed, all interrupts including NMI are disabled and the next instruction is
always executed. When the I bit or UI bit is set by one of these instructions, the new value
becomes valid two states after execution of the instruction ends.
5.8.3
Interrupts during Execution of EEPMOV Instruction
Interrupt operation differs between the EEPMOV.B instruction and the EEPMOV.W instruction.
With the EEPMOV.B instruction, an interrupt request including NMI issued during data transfer is
not accepted until data transfer is completed.
With the EEPMOV.W instruction, if an interrupt request is issued during data transfer, interrupt
exception handling starts at a break in the transfer cycles. The PC value saved on the stack in this
case is the address of the next instruction. Therefore, if an interrupt is generated during execution
of an EEPMOV.W instruction, the following coding should be used.
L1:
EEPMOV.W
MOV.W
R4,R4
BNE
L1
5.8.4
Vector Address Switching
Switching between H8S/2140B Group compatible vector mode and extended vector mode must be
done in a state with no interrupts occurring.
If the EIVS bit in SYSCR3 is changed from 0 to 1 when interrupt input is enabled because the
KIN15 to KIN0 and WUE15 to WUE8 pins are set at low level, a falling edge is detected, thus
causing an interrupt to be generated. The vector mode must be changed when interrupt input is
disabled, that is the
KIN15 to KIN0 and WUE15 to WUE8 pins are set at high level.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com