E5DC-RX0ASM-015 datasheet(116/120 Pages) OMRON

116 / 120 page

@C/E5@C-T

116

@C-B (Controllers with Push-In Plus Terminal Blocks)

1. Connecting Wires to the Push-In Plus Terminal Block

Part Names of the Terminal Block

Connecting Wires with Ferrules and Solid Wires

Insert the solid wire or ferrule straight into the terminal block until the

end touches the terminal block.

If a wire is difficult to connect because it is too thin, use a flat-blade

screwdriver in the same way as when connecting stranded wire.

Connecting Stranded Wires

Use the following procedure to connect the wires to the terminal block.

1. Hold a flat-blade screwdriver at an angle and insert it into the

release hole. The angle should be between 10° and 15°.

If the flat-blade screwdriver is inserted correctly, you will feel the

spring in the release hole.

2. With the flat-blade screwdriver still inserted into the release hole,

insert the wire into the terminal hole until it strikes the terminal

block.

3. Remove the flat-blade screwdriver from the release hole.

Checking Connections

• After the insertion, pull gently on the wire to make sure that it will

not come off and the wire is securely fastened to the terminal block.

• If you use a ferrule with a conductor length of 10 mm, part of the

conductor may be visible after the ferrule is inserted into the

terminal block, but the product insulation distance will still be

satisfied.

2. Removing Wires from the Push-In Plus Terminal Block

Use the following procedure to remove wires from the terminal block.

The same method is used to remove stranded wires, solid wires, and

ferrules.

1. Hold a flat-blade screwdriver at an angle and insert it into the

release hole.

2. With the flat-blade screwdriver still inserted into the release hole,

remove the wire from the terminal insertion hole.

3. Remove the flat-blade screwdriver from the release hole.

3. Recommended Ferrules and Crimp Tools

Recommended ferrules

Note: 1. Make sure that the outer diameter of the wire coating is

smaller than the inner diameter of the insulation sleeve of

the recommended ferrule.

2. Make sure that the ferrule processing dimensions conform

to the following figures.

Recommended Flat-blade Screwdriver

Use a flat-blade screwdriver to connect and remove wires.

Use the following flat-blade screwdriver.

The following table shows manufacturers and models as of 2015/Dec.

* OMRON's exclusive purchase model XW4Z-00B is available to

order as SZF 0-0.4

✕2.5 (manufactured by Phoenix Contact).

Release hole

Terminal (Insertion) hole

Ferrules and

Solid Wires

(1)

(2)

(3)

Flat-blade screwdriver

10 to 15°

(1)

(2)

(3)

10 to 15°

Flat-blade screwdriver

Applicable

wire

Ferrule

Conductor

length

(mm)

Wire

Stripping

length

(mm)

(Ferrules

used)

Recommended ferrules

(mm2)

(AWG)

Phoenix Contact

product

Weidmuller

product

Wago

product

0.25

10 AI 0.25-8

H0.25/12 FE-0.25-8N-YE

12 AI 0.25-10

---

0.34

10 AI 0.34-8

H0.34/12 FE-0.34-8N-TQ

12 AI 0.34-10

---

0.5

10 AI 0.5-8

H0.5/14

FE-0.5-8N-WH

12 AI 0.5-10

H0.5/16

FE-0.5-10N-WH

0.75

10 AI 0.75-8

H0.75/14 FE-0.75-8N-GY

12 AI 0.75-10

H0.75/16 FE-0.75-10N-GY

1/1.25 18/17

10 AI 1-8

H1.0/14

FE-1.0-8N-RD

12 AI 1-10

H1.0/16

FE-1.0-10N-RD

1.25/1.5 17/16

10 AI 1.5-8

H1.5/14

FE-1.5-8N-BK

12 AI 1.5-10

H1.5/16

FE-1.5-10N-BK

Recommended crimp tool

CRIMPFOX6

CRIMPFOX6T-F

CRIMPFOX10S

PZ6 roto

Variocrimp4

Model

Manufacturer

ESD0.40

✕2.5

Wera

SZS 0.4

✕2.5

SZF 0-0.4

✕2.5 *

Phoenix Contact

0.4

✕2.5✕75 302

Wiha

AEF.2.5

✕75

Facom

210-719

Wago

SDI 0.4

✕2.5✕75

Weidmuller

1.9 mm max.

2.6 mm max.

8 to 10 mm

Front

Side

0.4 mm

2.5 mm dia.

2.5 mm

E5DC-RX0ASM-015 Folha de dados(PDF) 116 Page - Omron Electronics LLC

E5DC-RX0ASM-015 Folha de dados(HTML) 116 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL