E5CC-RX2DBM-000 datasheet(127/138 Pages) OMRON

127 / 138 page

@C/E5@C-T

127

Removing the Main Unit

Press in the two hooks on the Main Unit and remove the Main Unit

from the Terminal Unit.

End Plate Installation

Make sure to attach PFP-M End Plates to the ends of the Units.

E5DC-B

Mounting to and Removing from DIN Track

• Mounting a Unit

Mount the Main Unit after first mounting the Terminal Unit on the

DIN Track.

• Removing a Unit

Pull down on the DIN Track Hook with a flat-blade screwdriver and

lift up the Unit.

Removing the Main Unit

End Plate Installation

Make sure to attach PFP-M End Plates to the ends of the Units.

Mounting to a DIN Track in Connection

1. Remove the connector cover on the side to use for connecting to

another terminal unit, and attach the unit to the DIN Track.

2. Connect the terminal unit connector to the next unit.

3. Wire the terminal units.

4. Insert the main units into the terminal units.

(1)

(2)

Individual

Mounting

Group Mounting

(1) Pull down the hook.

(2) Catch the top hook

on the DIN Track.

(3) Press the Unit

onto the DIN

Track.

(4) Make sure that the

hooks are locked

in place.

(1)

(1) Push in the hooks.

(2) Pull out the Main Unit.

Individual

Mounting

Group Mounting

(1)

(2)

Connector Cover (Accessory)

Left side

End Plate

(1)

(2)

(4)

(3)

E5CC-RX2DBM-000 Folha de dados(PDF) 127 Page - Omron Electronics LLC

E5CC-RX2DBM-000 Folha de dados(HTML) 127 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL