E5DC-RX0ASM-015 datasheet(107/112 Pages) OMRON

107 / 112 page

@C/E5@C-T

107

● Mounting

Mounting to a Panel

E5GC

1. For waterproof mounting, waterproof packing must be installed on

the Digital Temperature Controller. Waterproofing is not possible

when group mounting several Digital Temperature Controllers.

Waterproof packing is not necessary when there is no need for the

waterproofing function.

2. Insert the E5GC into the mounting hole in the panel.

3. Use two Mounting Adapters, either on the top and bottom or on the

right and left.

4. Push the Adapters from the terminals up to the panel, and

temporarily fasten the E5GC.

5. Tighten the two fastening screws on the Adapter. Alternately

tighten the two screws little by little to maintain a balance. Tighten

the screws to a torque of 0.29 to 0.39 N·m.

E5CC/E5CC-T

There are two models of Terminal Covers that you can use with the E5CC/

E5CC-T.

E5CC-U

For the Wiring Socket for the E5CC-U, purchase the P2CF-11 or

PG3A-11 separately.

1. For waterproof mounting, waterproof packing must be installed on the

Digital Temperature Controller. Waterproofing is not possible when

group mounting several Digital Temperature Controllers. Waterproof

packing is not necessary when there is no need for the waterproofing

function.

The E5CC-U cannot be waterproofed even if the Waterproof Packing

is inserted.

2. Insert the E5CC/E5CC-U/E5CC-T into the mounting hole in the

panel.

3. Push the adapter from the terminals up to the panel, and

temporarily fasten the E5CC.

4. Tighten the two fastening screws on the adapter.

Alternately tighten the two screws little by little to maintain a

balance. Tighten the screws to a torque of 0.29 to 0.39 N·m.

E5EC/E5AC/E5EC-T/E5AC-T

1. For waterproof mounting, waterproof packing must be installed on

the Digital Temperature Controller. Waterproofing is not possible

when group mounting several Digital Temperature Controllers.

Waterproof packing is not necessary when there is no need for the

waterproofing function.

2. Insert the E5EC/E5AC/E5EC-T/E5AC-T into the mounting hole in

the panel.

3. Push the adapter from the terminals up to the panel, and

temporarily fasten the E5EC/E5AC/E5EC-T/E5AC-T.

4. Tighten the two fastening screws on the adapter.

Alternately tighten the two screws little by little to maintain a

balance. Tighten the screws to a torque of 0.29 to 0.39 N·m.

E5DC

1. Insert the E5DC into the mounting hole in the panel. (Attach the

Terminal Unit after you insert the Main Unit.)

2. Push the Adapter from the Terminal Unit up to the panel, and

temporarily fasten the E5DC.

3. Tighten the two fastening screws on the Adapter. Alternately

tighten the two screws little by little to maintain a balance. Tighten

the screws to a torque of 0.29 to 0.39 N·m.

Mounting to and Removing from DIN Track

E5DC

• Mounting a Unit

Pull down the DIN Track hook on the Terminal Unit and catch the

top hook on the DIN Track.

Press the Unit onto the DIN Track until the DIN Track hooks are

locked in place.

Panel

Waterproof

Packing

Adapter

Panel

Water Proof Packing

Terminal Cover

(E53-COV17)

(Sold separately)

Adapter

Terminal Cover

(E53-COV23)

Adapter

Panel

Water Proof Packing

Terminal Cover

(E53-COV24)

Terminal Cover

(E53-COV24)

Main Unit

Panel

Terminal Unit

Adapter

1. Pull down the hook.

2. Catch the top hook on

the DIN Track.

4. Make sure that the hooks

are locked in place.

3. Press the Unit onto

the DIN Track.

E5DC-RX0ASM-015 Folha de dados(PDF) 107 Page - Omron Electronics LLC

E5DC-RX0ASM-015 Folha de dados(HTML) 107 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL