SIM800 datasheet(191/380 Pages) SIMCOM

191 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

191

2015-08-03

0 Report jamming status via URC every 3000ms. (only

when <mode> is set to “1” or “3”)

1 Report jamming status via URC when jamming status

changed.(only when <mode> is set to “1” or “3”)

Parameter

Saving

Mode

NO_SAVE

Max Response Time

Reference

Note



When you query jamming detection status after enable jamming

detection mode, you will get the URC of the format below:

+SJDR:1,<mode>,<var>,<display>,<result>

<result>=0, means no jamming.

<result>=1, means jamming is detected.

<result>=2, means industrial interference is detected.



“+SJDR: INTERFERENCE DETECTED” indicates industrial

interference which signifies unintentional radio link disturbances by

strong industrial radio sources.



Jamming detection PIN is designed to indicate jamming by

outputting different level. When jamming is detected, the PIN will

output a high level, otherwise, it will output a low level.



Jamming detection PIN is different among SIM800 series project,

please refer to chapter 21 for details.

6.2.59 AT+CPCMCFG

Set PCM Parameter

AT+CPCMCFG

Set PCM Parameter

Response

+CPCMCFG: (0-1)

Test Command

AT+CPCMCFG

Parameters

See Write Command

Response

+CPCMCFG: <format>

Read Command

AT+CPCMCFG

Parameters

See Write Command

Write Command

AT+CPCMCFG

=<format>

Response

ERROR

SIM800 Folha de dados(PDF) 191 Page - SIMCom

SIM800 Folha de dados(HTML) 191 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL