TDA4VE...ALZQ1 datasheet(121/251 Pages) TI

Nome de Peças	TDA4VE...ALZQ1

Descrição Electrónicos	TDA4VE TDA4AL TDA4VL Jacinto™ Processors, Silicon Revision 1.0

PDF	251 Pages

Scroll/Zoom	100%

Fabricante Electrônico	TI [Texas Instruments]

Página de início	http://www.ti.com

Logo

121 / 251 page

7.10.2.4 Isolated MCU and Main Domains Power- Up Sequencing

Isolated MCU and Main voltage domains enable an SoC’s MCU and Main processor sub-systems to operate

independently. There are 2 reasons an SoC’s PDN design may need to support independent MCU and Main

processor functionality. First is to provide flexibility to enable SoC low power modes that can significant reduce

SoC power dissipation when processor operations are not needed. Second is to enable robustness to gain

freedom from interference (FFI) of a single fault impacting both MCU and Main processor sub-systems which

is especially beneficial if using the SoC’s MCU as the system safety monitoring processor. The number of

additional PDN power rails needed is dependent upon number of different MCU IO signaling voltage levels. If

only 1.8V IO signaling is used, then only 2 additional power rails could be required. If both 1.8 and 3.3V IO

signaling is desired, then 4 additional power rails could be needed.

www.ti.com

TDA4VE-Q1, TDA4AL-Q1, TDA4VL-Q1

SPRSP62 – DECEMBER 2022

Submit Document Feedback

121

Product Folder Links: TDA4VE-Q1 TDA4AL-Q1 TDA4VL-Q1

TDA4VE...ALZQ1 Folha de dados(PDF) 121 Page - Texas Instruments