GENERAL DESCRIPTION

The MX29F004T/B is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories
offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29F004T/B is
packaged in 32-pin PLCC, TSOP, PDIP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• 524,288 x 8 only

• Single power supply operation

    - 5.0V only operation for read, erase and program operation

• Fast access time: 70/90/120ns

• Low power consumption

    - 30mA maximum active current (5MHz)

    - 1uA typical standby current

• Command register architecture

    - Byte Programming (7us typical)

    - Sector Erase (Sector structure:16KB/8KB/8KB/32KB and 64KBx7)

• Auto Erase (chip & sector) and Auto Program

    - Automatically erase any combination of sectors with Erase Suspend capability.

    - Automatically program and verify data at specified address

• Erase suspend/Erase Resume

    - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.

• Status Reply

    - Data polling & Toggle bit for detection of program and erase cycle completion.

• Chip protect/unprotect for 5V only system or 5V/12V system.

• 100,000 minimum erase/program cycles

• Latch-up protected to 100mA from -1V to VCC+1V

• Low VCC write inhibit is equal to or less than 3.2V

• Package type:

    - 32-pin PLCC, TSOP or PDIP

• Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash

• 20 years data retention