TERMINATION Datasheet(PDF) - 712S270XM - Glenair, Inc.

Os motores de busca de Datasheet de Componentes eletrônicos

ALLDATASHEETPT.COM

X

TERMINATION Folha de dados, PDF

: ALL 3M Electronics(5)ACE Technology Co., LTD.(1)Adam Technologies, Inc.(13)Advanced Power Electronics Corp.(10)Advanced Technical Materials Inc.(23)Aeroflex Circuit Technology(1)Agere Systems(3)Agilent(Hewlett-Packard)(1)Allied Components International(1)Altera Corporation(3)American Accurate Components, Inc.(2)American Electronic Components, inc(1)Amphenol Corporation(13)Amphenol Industrial Products Group.(2)Amphenol SV Microwave(5)Amphenol Wilcoxon Sensing Technologies.(1)Analog Devices(10)Analog Intergrations Corporation(2)Analog Microelectronics(3)Anaren Microwave(60)Anpec Electronics Coropration(7)API Technologies Corp(3)Applied Micro Circuits Corporation(1)Artesyn Technologies(2)ATMEL Corporation(1)AVAGO TECHNOLOGIES LIMITED(2)AVX Corporation(10)BCD Semiconductor Manufacturing Limited(4)Bel Fuse Inc.(2)Belden Inc.(1)Bi technologies(5)Bourns Electronic Solutions(31)Broadcom Corporation.(1)California Eastern Labs(4)California Micro Devices Corp(34)Clare, Inc.(2)CONEC Elektronische Bauelemente GmbH(72)Contec Co., Ltd(1)Cynergy3 Co(1)DDK Ltd.(8)Diodes Incorporated(9)E-Tech Electronics LTD(4)Emerson Network Power(1)Enpirion, Inc.(2)EPCOS(16)Eutech Microelectronics Inc(4)Exar Corporation(14)Excelliance MOS Corp.(2)
: More Close

Palavra-chave pesquisada : 'TERMINATION' - Total: 49 (2/3) Pages

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
Glenair, Inc.	712S270XM	255Kb/1P	Composite EMI/RFI Single Shield Termination Conduit Fitting
	IT37267-10BR1712	539Kb/2P	BR Adapter for Termination of UNI4883 Rubber Conduit
	712S271XM	258Kb/2P	Composite Dual EMI/RFI Shield Termination Conduit Fitting
	GAP-027	236Kb/3P	319 SERIES SWING ARM CLAMP SHIELD SOCK TERMINATION PROCEDURE
	311AS034	301Kb/1P	Composite Lamp Base Thread EMI/RFI Shield Termination Backshell
	311AS063XM08	288Kb/2P	Composite Lamp Base Thread EMI/RFI Environmental Shield Termination Backshell
	550T008M	85Kb/2P	EMI/RFI D-Subminiature Split Backshell G-Spring Shield Termination
	MLDM1L-15P-4K5-18M	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-21S-4K5-18B	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-21S-4K7-4B	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L9P-0J5-18M	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-15P4K5-18S1	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-25S-6K1-12B	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-25S-6K5-18S	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-31S-6K1-6S1	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-31S-6K5-18S	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-15P-4K5-18F	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L9P-8K7-18M	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-15S-6K5-18H	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination
	MLDM1L-21P-4K5-18M	233Kb/3P	MLDM Low Profile Metal Shell Micro-D Insulated Wire Termination

< 1 2 3 >

< 1 2 3 >

O que é TERMINATION

Terminação em componentes eletrônicos significa terminação elétrica.

É comumente usado para reduzir as reflexões da dano de sinal na linha de transmissão de ondas eletromagnéticas.

Por exemplo, ao enviar um sinal em um cabo ou placa de circuito impresso (PCB), o sinal viaja até o final do cabo ou PCB.

Nesse ponto, quando o sinal atinge o final, parte do sinal pode ser refletido e colidir novamente.

Essas reflexões podem causar corrupção do sinal e velocidade reduzida.

Portanto, a terminação é usada para minimizar essas reflexões e reduzir o ruído do sinal das extremidades.

A terminação é geralmente implementada usando resistores, capacitores ou diodos.

Um resistor de 50 ohms geralmente é usado para fechar as extremidades.

Isso minimiza as reflexões do sinal e acelera o sinal transmitido.

*Esta informação é apenas para fins informativos gerais, não seremos responsáveis por qualquer perda ou dano causado pelas informações acima.

ALLDATASHEET é útil para você? [ DONATE ]

Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes
All Rights Reserved©Alldatasheet.com

Mirror Sites English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz

Family Site : ic2ic.com | icmetro.com