1. General Information & Certification

️· Company: Abracon Corporation
️· Certification: ISO9001:2008 Certified
️· Website: www.abracon.com
️· Contact Information: 30332 Esperanza, Rancho Santa Margarita, California 92688; Tel: 949-546-8000; Fax: 949-546-8001
️· Revision Date: September 09, 2014
️· Dimensions (typical): 2.29 x 1.73 x 1.55mm

2. Product Series & Applications

️· Product Series: Abracon IS Series of Inductors (specifically the AISC-0805F and AISC-0805)
️· Application Restrictions: Products are intended for commercial, industrial, and automotive applications. Crucially, Abracon disclaims liability for use in military, aviation, aerospace, or life-dependent medical applications unless explicitly authorized.

3. Part Numbering and Electrical Characteristics (Example Rows)

This section describes the Inductance, Tolerance, Q factor, SRF, DC Resistance and Maximum DC Current. Below are some rows represented. This isn't a complete listing, just to give the overall description of the data.

️· AISC-0805F-100:
- L (nH): 10000 @ 2.5MHz
- Tolerance: 5,10,20%
- Q (Min): 10 @ 2.5MHz
- SRF (MHz): 30
- R Max (DC) (Ω): 4.70
- I Max (DC) (mA): 98
️· AISC-0805F-150:
* L (nH): 15000 @ 2.5MHz
* Tolerance: 5,10,20%
* Q (Min): 10 @ 2.5MHz
* SRF (MHz): 23
* R Max (DC) (Ω): 6.50
* I Max (DC) (mA): 80
️· AISC-0805F-220:
* L (nH): 22000 @ 2.5MHz
* Tolerance: 5,10,20%
* Q (Min): 10 @ 2.5MHz
* SRF (MHz): 20
* R Max (DC) (Ω): 8.00
* I Max (DC) (mA): 68
️· AISC-0805F-330:
* L (nH): 33000 @ 2.5MHz
* Tolerance: 5,10,20%
* Q (Min): 10 @ 2.5MHz
* SRF (MHz): 17
* R Max (DC) (Ω): 10.7
* I Max (DC) (mA): 60
️· AISC-0805F-470:
* L (nH): 47000 @ 2.5MHz
* Tolerance: 5,10,20%
* Q (Min): 10 @ 2.5MHz
* SRF (MHz): 14
* R Max (DC) (Ω): 13.8
* I Max (DC) (mA): 55
️· AISC-0805F-680:
- L (nH): 68000 @ 2.5MHz
- Tolerance: 5,10,20%
- Q (Min): 8 @ 2.5MHz
- SRF (MHz): 11
- R Max (DC) (Ω): 17.5
- I Max (DC) (mA): 40
4. Test Conditions:

️· Inductance (L): Measured using Agilent 4287A + Agilent 16197A or equivalent, with a 50mV test signal.
️· Direct Current Resistance (DCR): Measured using HIOKI 3540 or equivalent.
️· Temperature Rise Current (Ir): Determined using an electric power and electric current meter, along with a thermometer.
️· Irms: Calculated based on a 20°C temperature rise.

5. Outline Drawing & Packaging:

️· The document includes a typical outline drawing showing dimensions.
️· Tape & Reel specifications are given, including parameters like A, B, K, and T.

6. Reflow Profile: A reflow profile diagram is present.

Important Notes:

️· The provided document is a data sheet excerpt. There are likely more parts listed that are not included here.
️· Always consult the complete data sheet and Abracon's website for the most accurate and up-to-date information.
️· Pay very close attention to the application restrictions and warnings regarding use in critical systems.