1. Document Overview

️· Document Type: Data Sheet
️· Company: Diotec Electronics Corp.
️· Document Number: FRSDBS-5000-1A
️· Location: 18020 Hobart Blvd., Unit B, Gardena, CA 90248, USA. (Includes phone and fax numbers)

2. Key Features/Highlights

️· Soft Recovery Characteristic: No ringing, spikes, or overshoot in the recovery waveform. This is a primary selling point.
️· High Frequency: 250 kHz
️· Fast Recovery: 100ns - 150ns
️· Low EMI: Minimal Radio Frequency Interference (RFI)
️· Efficient Heat Dissipation: Vacuum Die Soldering provides good thermal performance. Solder voids are minimized (typical <2%, max <10% of die area).
️· Proprietary Junction Passivation: Enhances reliability and performance.
️· Wide Application Range: Suitable for Motor Speed Controllers, Inverters, Converters, Choppers, and Power Supplies.
️· UL Recognized: File #E124962
️· RoHS Compliant: Meets environmental regulations.

3. Mechanical Data

️· Case: Molded epoxy with an integral heat sink. Epoxy has a UL Flammability Rating of 94V-0.
️· Terminals: Round silver-plated copper pins or Fast-on terminals.
️· Soldering: Per MIL-STD 202 Method 208 (guaranteed).
️· Polarity: Marked on the side of the case.
️· Mounting: Through-hole for #8 screw.
️· Maximum Mounting Torque: 20 in-lb.
️· Weight: 0.72 ounces (20.3 grams)

4. Dimensions (with some converted units)

The document provides dimensions in both millimeters (mm) and inches (in). Here's a summary (note: some values are "Nom" or "Typ," indicating nominal or typical values):

️· BL: 28.4 - 28.7 mm (1.12 - 1.13 inches)
️· BW: n/a - 10.3 mm (n/a – 0.405 inches)
️· LD: 1.27 mm (Typ) (0.050 inch Typ)
️· LL: 19.0 mm (0.750 inch)
️· LM: 3.175 mm Nom (0.125 inch Nom)
️· LS: 5.08 mm Typ (0.200 inch Typ)

5. Ratings and Electrical Characteristics (for SDB Models: 5000-S, 5001-S, 5002-S, 5004-S, 5006-S)

This is a table of key parameters. Here's a summarized version.

Parameter	5000-S	5001-S	5002-S	5004-S	5006-S	Units
Reverse Voltage (VRRM)	50	100	200	400	600	Volts
Reverse Peak Current (IRRM)	50	50	50	50	50	Amps
Forward Voltage (VF)	1.35	1.35	1.35	1.35	1.35	Volts
Reverse Leakage (IRRM)	1.0	1.0	1.0	1.0	1.0	mA
Reverse Recovery Time (TRR)	150 (Typ)	150 (Typ)	150 (Typ)	150 (Typ)	150 (Typ)	ns
Junction/Storage Temp.	-55 to +150	-55 to +150	-55 to +150	-55 to +150	-55 to +150	°C

6. Notes

️· Bolt the heat sink with a #8 screw and use silicon thermal compound for maximum heat transfer.

7. Diagrams and Layout

The document contains diagrams indicating the physical layout of the device and the meaning of various abbreviations (BL, BW, LD, etc.). I am unable to reproduce those here, as they are graphical representations. The abbreviations are described in the diagram legends.

Key Takeaways: This is a data sheet for a fast recovery diode with excellent thermal performance, intended for a range of power electronics applications. The manufacturer is highlighting the benefits of the device's construction and electrical characteristics.