Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

TSV639X Datasheet with Chat AI
  • AIauthorized

    Hello, Please ask a question about TSV639X Datasheet

  • # Example questions: ➢ What is the minimum input voltage (vih) required for the shdn pin to be recognized as a logic high when the supply voltage is 5v?
    ➢ What is the typical value for common mode rejection ratio (cmrr) at a supply voltage of 5v?
    ➢ How does the supply current in shutdown mode change as the ambient temperature increases from 25°c to 125°c?

  • Part No.TSV639X
    ManufacturerSTMICROELECTRONICS
    Size942 Kbytes
    Pages25 pages
    DescriptionMIcropower (60 關A), wide bandwidth (2.4 MHz) CMOS op-amps
    Datasheet Summary with AI

    Important Notes:

    ️· Temperature: "Tmin < Top < Tmax" generally refers to the full operating temperature range, and values listed for this condition represent the *maximum* or *minimum* value across that range.
    ️· Typ: Represents the typical or nominal value, measured under specific test conditions.
    ️· Units: I'll include units with the values.
    ️· Data Variation: Data values vary significantly depending on supply voltage.

    ---

    I. Common Parameters (Across all Supply Voltages)

    ️· Input Offset Voltage (Vio):
    - TSV639x/TSV639xA: 3 mV (typical), 4.5 mV (max)
    - TSV6393AIST: 1 mV (typical), 2.2 mV (max)
    ️· Input Offset Voltage Drift (dVio): 2 µV/°C
    ️· Input Bias Current (Iib): 1 pA (typ), 100 pA (max)
    ️· Input Offset Current (Iio): 1 pA (typ), 100 pA (max)
    ️· Gain Bandwidth Product (GBP): 2.4 MHz (at 5V), 2.0 MHz (at 1.8V)
    ️· Total Harmonic Distortion + Noise (THD+N): 0.015% (5V)

    II. Electrical Characteristics by Supply Voltage

    A. Vcc = 1.8V

    ️· Common Mode Rejection Ratio (CMRR): 60 dB (typical), 55 dB (max)
    ️· Supply Voltage Rejection Ratio (SVRR): Not specified.
    ️· Large Signal Voltage Gain (Avd): 89 dB (typical), 84 dB (max)
    ️· High Level Output Voltage (VOH): 35 mV (typical), 50mV (max).
    ️· Low Level Output Voltage (VOL): Not specified.
    ️· Output Sink Current (Iout): 40 mA (typical), 65 mA (max).
    ️· Output Source Current (Iout): 40 mA (typical), 72 mA (max).
    ️· Supply Current (Icc) – No Load: 50 µA (typical), 60 µA (max).
    ️· Supply Current (Icc) – Max: 69 µA (typical), 72 µA (max).
    ️· Slew Rate (SR): 1.1 V/µs

    B. Vcc = 5V

    ️· Common Mode Rejection Ratio (CMRR): 60 dB (typical), 55 dB (max)
    ️· Supply Voltage Rejection Ratio (SVRR): 75 dB (typical), 93 dB (max).
    ️· Large Signal Voltage Gain (Avd): 89 dB (typical), 98 dB (max).
    ️· High Level Output Voltage (VOH): 35 mV (typical), 7 mV (max).
    ️· Low Level Output Voltage (VOL): 6 mV (typical), 35mV (max).
    ️· Output Sink Current (Iout): 40 mA (typical), 65 mA (max).
    ️· Output Source Current (Iout): 40 mA (typical), 72 mA (max).
    ️· Supply Current (Icc) – No Load: 50 µA (typical), 60 µA (max).
    ️· Supply Current (Icc) – Max: 60 µA (typical), 69 µA (max).
    ️· EMI Rejection Ratio (EMIRR):
    - 400 MHz: 61 dB
    - 900 MHz: 85 dB
    - 1800 MHz: 92 dB
    - 2400 MHz: 83 dB
    ️· Slew Rate (SR): 1.1 V/µs

    III. Shutdown Characteristics (Both Voltages)

    ️· Shutdown Current (Icc): 5 nA (typical), 50 nA (max)
    ️· Turn-On Time (Ton): 200 ns
    ️· Turn-Off Time (Toff): 20 ns
    ️· SHDN Logic High (VIH): 2V/5V
    ️· SHDN Logic Low (VIL): 0.8V/0.8V
    ️· Output Leakage (IOLeak): 50 pA (typical), 1 nA (max)

    ---

    Key Takeaways:

    ️· This is a relatively low-power op-amp, with quiescent currents in the microamp range.
    ️· CMRR and SVRR are good, providing rejection of common-mode and supply noise.
    ️· The op-amp is capable of driving moderate loads.
    ️· Shutdown mode is very efficient.
    ️· EMI rejection is specified for 5V supply.

    Important Notes:

    ️· Temperature: "Tmin < Top < Tmax" generally refers to the full operating temperature range, and values listed for this condition represent the *maximum* or *minimum* value across that range.
    ️· Typ: Represents the typical or nominal value, measured under specific test conditions.
    ️· Units: I'll include units with the values.
    ️· Data Variation: Data values vary significantly depending on supply voltage.

    ---

    I. Common Parameters (Across all Supply Voltages)

    ️· Input Offset Voltage (Vio):
    - TSV639x/TSV639xA: 3 mV (typical), 4.5 mV (max)
    - TSV6393AIST: 1 mV (typical), 2.2 mV (max)
    ️· Input Offset Voltage Drift (dVio): 2 µV/°C
    ️· Input Bias Current (Iib): 1 pA (typ), 100 pA (max)
    ️· Input Offset Current (Iio): 1 pA (typ), 100 pA (max)
    ️· Gain Bandwidth Product (GBP): 2.4 MHz (at 5V), 2.0 MHz (at 1.8V)
    ️· Total Harmonic Distortion + Noise (THD+N): 0.015% (5V)

    II. Electrical Characteristics by Supply Voltage

    A. Vcc = 1.8V

    ️· Common Mode Rejection Ratio (CMRR): 60 dB (typical), 55 dB (max)
    ️· Supply Voltage Rejection Ratio (SVRR): Not specified.
    ️· Large Signal Voltage Gain (Avd): 89 dB (typical), 84 dB (max)
    ️· High Level Output Voltage (VOH): 35 mV (typical), 50mV (max).
    ️· Low Level Output Voltage (VOL): Not specified.
    ️· Output Sink Current (Iout): 40 mA (typical), 65 mA (max).
    ️· Output Source Current (Iout): 40 mA (typical), 72 mA (max).
    ️· Supply Current (Icc) – No Load: 50 µA (typical), 60 µA (max).
    ️· Supply Current (Icc) – Max: 69 µA (typical), 72 µA (max).
    ️· Slew Rate (SR): 1.1 V/µs

    B. Vcc = 5V

    ️· Common Mode Rejection Ratio (CMRR): 60 dB (typical), 55 dB (max)
    ️· Supply Voltage Rejection Ratio (SVRR): 75 dB (typical), 93 dB (max).
    ️· Large Signal Voltage Gain (Avd): 89 dB (typical), 98 dB (max).
    ️· High Level Output Voltage (VOH): 35 mV (typical), 7 mV (max).
    ️· Low Level Output Voltage (VOL): 6 mV (typical), 35mV (max).
    ️· Output Sink Current (Iout): 40 mA (typical), 65 mA (max).
    ️· Output Source Current (Iout): 40 mA (typical), 72 mA (max).
    ️· Supply Current (Icc) – No Load: 50 µA (typical), 60 µA (max).
    ️· Supply Current (Icc) – Max: 60 µA (typical), 69 µA (max).
    ️· EMI Rejection Ratio (EMIRR):
    - 400 MHz: 61 dB
    - 900 MHz: 85 dB
    - 1800 MHz: 92 dB
    - 2400 MHz: 83 dB
    ️· Slew Rate (SR): 1.1 V/µs

    III. Shutdown Characteristics (Both Voltages)

    ️· Shutdown Current (Icc): 5 nA (typical), 50 nA (max)
    ️· Turn-On Time (Ton): 200 ns
    ️· Turn-Off Time (Toff): 20 ns
    ️· SHDN Logic High (VIH): 2V/5V
    ️· SHDN Logic Low (VIL): 0.8V/0.8V
    ️· Output Leakage (IOLeak): 50 pA (typical), 1 nA (max)

    ---

    Key Takeaways:

    ️· This is a relatively low-power op-amp, with quiescent currents in the microamp range.
    ️· CMRR and SVRR are good, providing rejection of common-mode and supply noise.
    ️· The op-amp is capable of driving moderate loads.
    ️· Shutdown mode is very efficient.
    ️· EMI rejection is specified for 5V supply.

    Part No.TSV639X
    ManufacturerSTMICROELECTRONICS
    Size942 Kbytes
    Pages25 pages
    DescriptionMIcropower (60 關A), wide bandwidth (2.4 MHz) CMOS op-amps
    ALLDATASHEET é útil para você?  [ DONATE ] 

    Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
    All Rights Reserved©Alldatasheet.com


    Mirror Sites
    English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
    Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
    Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
    Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
    Family Site : ic2ic.com  |   icmetro.com