# M8MS Potentiometer Converter

## Ordering Information

· Model Designation: M8MS-[1]-R[2]
· Specify codes for [1] (Output Selection) and [2] (Options).
· /Q option allows selection of coatings (/C01: Silicone, /C02: Polyurethane, /C03: Rubber) or multi-turn fine adjustment (/V01).

## Input Specifications

· Total Resistance: 100 Ω – 10 kΩ
· Excitation Voltage: 0.5 V DC
· Minimum Span: 80% of total resistance

## Output Options ([1])

· 6A: Output 1: 1–5 V DC (Load: 2500 Ω min.); Output 2: 4–20 mA DC (Load: 300 Ω max.)
· 44: Output 1: 0–10 V DC (Load: 5000 Ω min.); Output 2: 0–10 V DC (Load: 5000 Ω min.)
· 55: Output 1: 0–5 V DC (Load: 2500 Ω min.); Output 2: 0–5 V DC (Load: 2500 Ω min.)
· 66: Output 1: 1–5 V DC (Load: 2500 Ω min.); Output 2: 1–5 V DC (Load: 2500 Ω min.)

## Power Input

· DC Voltage: 24 V DC (Range: 24 V ±10%, Ripple: 10% max.)

## General Specifications

· Mounting: Requires dedicated Installation Base (M8BSx)
· Adjustment: Zero (0-20% of resistance), Span (80-100% of resistance)
· Housing Material: Flame-resistant resin (black)
· Isolation: Input to output to power

## Performance

· Accuracy: ±0.1 %
· Temperature Coefficient: ±0.02 %/°C
· Response Time: ≤ 600 ms
· Insulation Resistance: ≥ 100 MΩ
· Dielectric Strength: 1500 V AC (input to ground), 500 V AC (output to output)

## Installation

· Current Consumption: Approx. 30 mA (50 mA for current output)
· Operating Temperature: 0 to 55°C
· Operating Humidity: 30 to 95% RH