Fabricante Electrônico | Nome de Peças | Folha de dados | Descrição Electrónicos |
TE Connectivity Ltd |
408-8552
|
88Kb / 2P |
This tool is shipped in kit form and consists of the holder base, the cutting base, and the cutter set gage. Refer to Figure 1 and Figure 4. The kit also contains two hex wrenches.
|
Tyco Electronics |
408-4214
|
136Kb / 5P |
Installation and removal of the crimper from the tool holder assembly
|
Freescale Semiconductor... |
MC9S08SH4CTG
|
1Mb / 341P |
This is the MC9S08SH8 datasheet set consisting of the following files
|
NXP Semiconductors |
MCF51QW256DS
|
922Kb / 42P |
This is the MCF51QW256 Data Sheet set consisting of the following files
1.1, 07/2013 |
MCF51JG256DS
|
1,022Kb / 46P |
This is the MCF51JG256 Data Sheet set consisting of the following files
Rev.1.1, 07/2013 |
Xilinx, Inc |
EK-V6-ML605-G
|
1Mb / 2P |
The Virtex짰-6 FPGA ML605 Evaluation Kit is the Xilinx base platform
|
Tyco Electronics |
408-10176
|
147Kb / 3P |
The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet.
|
408-10266
|
373Kb / 6P |
Insert the shank of the nest into the yoke and tighten the set screw.
|
408-8737
|
120Kb / 2P |
The die assembly consists of an indenter die and nest die. Each die is held in the tool by a single screw
|
Molex Electronics Ltd. |
200222-0300
|
230Kb / 2P |
This tool is for the insertion and extraction of MultiCat Mid-Power terminals
01-22-20 |